Features
• Energy saving, environmental friendly, No UV or IR radiation.
• Anti-shock, anti-moisture, noglare, no strobe light, protecting your eyes.
• High intensity and stability, no maintenance cost.
• Using high quality LED chips.
• Universal voltage AC100-277V.
• High Power Factor >0.95, Low THD Driver.
• 100% Die-cast aluminum gasketed enclosure.
• Protective powder coating for lasting appearance.
• IP65 rating for outdoor use.
Application
City expressway, trunk road, factories, schools, garden, parking lots, pubic parks etc.
Parameters
General Performance |
Power | 60W | 100W | 150W |
Lumen Output | 7800lm | 13000lm | 19500lm | |
Efficacy | 130lm/w | |||
Color Temperature | 3000K/4000K/5000K/5700K | |||
LED | Lumileds 3030 | |||
Electrical | Power Factory | >0.95 | ||
Input Voltage | AC100-277V,50/60Hz | |||
THD | <20% | |||
Physical | Weight | 7.0KG | 7.0KG | 7.2KG |
Dimension (mm) | 360x360x504 | 360x360x504 | 360x360x504 | |
Packing Size (cm) | 48×40×16 | 48×40×16 | 48×40×16 | |
Housing | Die-cast aluminum | |||
Housing | 120° | |||
Lens | Glass | |||
Mounting | For d: 2-3/8" and 3" Tenons | |||
Operation Temperature | For d: 2-3/8" and 3" Tenons | |||
Humidity | 20%~85%,non condensing | |||
Finish | Black | |||
IP rated | IP65 | |||
Certificate | Certificate | LM80 | ||
Material Usage | RoHS compliant | |||
Drive Class | Class II | |||
LED Class | LM80 rated to 50,000 hours |
Photometric Distribution: (120°)
Packaging
Installation Instructions
Warning: Do cut off electrical source in order to avoid electrical
shock and endanger life-safety before installation.
Step 1: Pass the leads of the lights through the stem, then fix the stem with the lamp.
Step 2: Pass the leads of the light through the tenon pole, then using screws to fix it.
Step 3: Electrical connections:
Connect the black wire to line.
Connect the white wire to neutral.
Connect the green or green/yellow wire to ground and good waterproof processing.
Step 4: On the lamps and lanterns hung up safety rope, and then install the lamp on the mast.